;===============================================================================
; ASPEED Graphics Solaris x86 Driver Release Notes
;===============================================================================
v.1.01.05: ycchen@050415
01.[Bug] Fixed failed to display as secondary
02.[Bug] [AST2500] Fixed 1680x1050 display abnormal issue on DELL 2410 monitor
03.[New] [AST2500] Support AST2500 VGA only mode(without BMC)
v.1.01.04: ycchen@041615
01.[Bug] [AST2500] Fixed Threshold Issue for reduced blank mode
v.1.01.03: ycchen@040215
01.[Bug] [AST2500] Recover E2M for AST2500A0
02.[New] Remove AST2500A0 VCLK patch for AST2500A1 and after
03.[Bug] [DP501] Fixed cannot display issue with 2-lanes design
04.[Bug] [DP501] Fixed sw reset cause screen blank issue
05.[Bug] [ITE66121] Fixed screen blank issue sometimes
v.1.01.00: ycchen@010815
01.[New] Support AST2500
02.[Bug] Fixed Transient Garbage While System Resume from Hibernate
----------------------------------------------------------------------
v.1.00.07: ycchen@101514
v.1.00.01: ycchen@060514
01.[Bug] Fail to un-install if run "./update.sh uninstall"
v.1.00.00: ycchen@042814
01.[Bug] Fixed 1600x900 cannot display properly
02.[New] Enable shadow framebuffer if NoAccel defined
03.[Bug] Fail to un-install if run "./update.sh uninstall"
----------------------------------------------------------------------
v.0.99.10: ycchen@032114
01.[Bug] Fixed AST1400 cannot support Wide Screen
02.[Bug][DP501] Fixed resume failed from power management
v.0.99.09: ycchen@030414
01.[Bug] [AST2400] Fixed Display Abnormal on X Window Desktop
v.0.99.08: ycchen@022414
01.[Bug] [DP501] Fixed Screen Blank Sometimes Issue
v.0.99.06: ycchen@011014
01.[Bug] [DP501] Fixed Screen Blank Sometimes Issue
v.0.99.05: ycchen@010214
01.[Bug] [DP501] Fixed Screen Blank Sometimes Issue
02.[Bug] [SIL164] Fixed Screen Blank Resume from Suspend
03.[New] [DP501] Modify for Lenovo Ramjet and Renegade SDV
v.0.99.04: ycchen@120613
01.[Bug] [DP501] Fixed EDID cannot be read properly when system reset
v.0.99.01: ycchen@112113
01.[New] Support AST2400 + DP501
----------------------------------------------------------------------
v.0.98.00: ycchen@072413
01.[Bug] Fixed display abnormal issue with GOP driver
02.[Bug] Fixed S3 resume failed issue
----------------------------------------------------------------------
v.0.97.05: ycchen@010713
01.[New] [AST2300/2400] Support ITE66121, ycchen@010413
02.[Bug] [AST2300/2400] Modify DRAM Settings by H/W Request
03.[New] remove wide screen mode if the attached monitor is not wide screen monitor
----------------------------------------------------------------------
v.0.96.00: by ycchen@090612
01.[Bug] Fixed 1920x1080 Screen not Full on SAMSUNG SyncMaster BX2231
02.[New] Support 1600x900 60Hz (CVT Reduced Blank)
03.[Bug] Fixed display garbage issue when system restart, ycchen@090112
04.[Bug] Fixed cannot support wide screen mode on AST1300
----------------------------------------------------------------------
v.0.95.01: ycchen@052512
01.[Bug] Fixed iKVM cannot display properly with older VBIOS (before v.0.92.00)
02.[New] [AST2300] Modify DRAM settings by H/W request (2012_05_09)
03.[New] Support 1360x768 60Hz
v.0.95.00: ycchen@032912
01.[New] Add Scratch to Disable 1920x1200 resolution
----------------------------------------------------------------------
v.0.94.3: ycchen@111011
01.[New] Support Solaris 11 x86
v.0.94.2: ycchen@102811
01.[New] [AST2300] Modify DRAM Settings by H/W Request (07/06/11), ycchen@081111
02.[Bug] Fixed can't boot to X Window proprely if didn't attach EDID monitor
03.[New] Support 1280x800 60Hz, 1440x900 60Hz, 1680x1050 60Hz CVT reduced blank modes
----------------------------------------------------------------------
v.0.93.09: ycchen@071111
01.[Bug] Fixed the side effect of v.0.93.08 change item #2
v.0.93.08: ycchen@053111
01.[New] [AST2300] Modify MCLK to 396MHz by H/W request
02.[Bug] Patch no modes can display if attach VA2216W monitor
v.0.93.07: ycchen@050911
01.[Bug] Fixed it takes too long time to get EDID from EDID failed monitor
v.0.93.04: ycchen@030611
01.[New] [AST2300] Modify for DDR3 2Gb Support
02.[New] [AST2300] Slow Down CPU/AHB clock in VGA only mode
03.[Bug] Fixed 640x480 256c, 800x600 256c display failed issue if frame buffer size is above than 32MB
v.0.93.03: ycchen@021011
01.[New] [AST2300] Update DRAM Settings by H/W Request (020811)
02.[New] [AST2100/2150] Enable AST2100/2150 DRAM Calibration by H/W Request (021411)
v.0.93.01: ycchen@1211710
01.[New] [AST2300] Update DRAM Settings by H/W Request (121010)
02.[New] [AST2300] Modify CRT Threshold by H/W request
----------------------------------------------------------------------
v.0.92.02: ycchen@102210
01.[Bug] Fixed AST2000 can't work issue, ycchen@090810
02.[Bug] Fixed Wave form issue on 1280x800 60Hz and 1280x1024 75Hz modes
03.[Bug] Fixe 1400x900 display abnormal issue, ycchen@102210
04.[New] [AST2300] DRAM type and size selection based on H/W trapping, ycchen@102210
v.0.92.01: ycchen@082610
01.[Bug] Fixed video display abnormal in 32bpp modes
02.[New] Enable Video acceleration for AST1180 and AST2300
v.0.92.00: ycchen@081610
01.[New] Support AST1180
02.[New] Add NewModeInfo to Scratch for ASPEED Graphics Series
03.[New] Support AST2300 VGA only solution
04.[New] Support for AST2300A0 and after both
05.[New] Add wide screen mode check for iKVM backward compatible
----------------------------------------------------------------------
v.0.91.09: ycchen@062110
01.[New] Support AST2300
02.[New] Support wide screen mode (1280x800, 1440x900, 1680x1050) except for AST2000
v.0.91.08: ycchen@050510
v.0.91.07: ycchen@041910
01.[Bug] Fixed CRT timing not correct issue
----------------------------------------------------------------------
v.0.90.08: ycchen@122909
01. [Bug] Fixed display abnormal on the of the screen if run xvidtune, ycchen@122909
v.0.90.04: ycchen@092109
01.[Bug] Fixed S3 can't resume on on customer's platform
----------------------------------------------------------------------
v.0.89.09: ycchen@061209
01.[Bug] Fixed Scratch setting not correct issue
v.0.89.08: ycchen@052209
01.[Bug] Fixed Suspend can't resume issue
v.0.89.07: ycchen@050509
01.[Bug] Fixed the flashing issue while running x11perf
02.[Bug] Fixed Cursor disappear issue after clicking display page on RHEL4.6 on ASUS M3A78-CM M/B
03.[Bug] Fixed click mouse will show block temporarily while playing the game - KjumpingCube
04.[Bug] Fixed display abnormal in game - Kolf on RHEL4
v.0.89.00: ycchen@031209
01.[Bug] Fixed xorg bugzilla #20609: cursor color incorrect issue, ycchen@031209
02.[Bug] Fixed xorg bugzilla #20472: Xtest failed issue, ycchen@031309
----------------------------------------------------------------------
v.0.88.09: ycchen@021109
01.[Bug] Fixed SLES 10.2 desktop display abnormal when video buffer abve than 16MB
v.0.88.08: ycchen@011609
01.[Bug] Fixed GetMaxDCLK() ambiguous issue, ycchen@011609
02.[Bug] Fixed the support mode issue on Solaris 10 x86
v.0.88.07: ycchen@010509
01.[New] Support AST2200/2150
v.0.88.06: ycchen@120508
01.[Bug] Fixed pull up and down the information window of LSI MegaRAID managerment will become cloudy on SLES10.2
v.0.88.05: ycchen@111308
01.[Bug] Fixed AST1100 1280x1024x32bpp threshold issue
02.[Bug] Fixed some objects disappeared while moving in Game/Potato Guys FC9
03.[Bug] Fixed some objects color abnormal while moving in Game/Potato Guys FC6
v.0.88.04: ycchen@100708
01.[Bug] Fixed KVM + CRT threshold issue on AST2100 8bpp modes, ycchen@100708
02.[New] Remove the reference moduless of vgahw, vbe, int10 for SPARC, ycchen@101708
03.[Bug] Fixed the issue of the screen saver - celtic hung on SUSE11, ycchen@102308
04.[New] Check VGA2 Clone Support from Scratch
05.[Bug] Fixed the issue of the screen saver - DecayScreen display abnormal issue on FC5, ycchen@102808
06.[New] Modify DRAM Setting by H/W  Request, ycchen@102808
v.0.88.03: ycchen@100208
01.[New] Add for secondary display support, ycchen@100208
02.[New] Modify Product Name & Symbol
   - ASPEED & ASPEED Graphics Family
----------------------------------------------------------------------
v.0.86.10: ycchen@072508
01.[Bug] Fixed GR. Reg. Settings Incorrect Issue
v.0.86.04: ycchen@032508
01.[New] Modify DRAM utilization to 60% for AST1100/2100 16bits DRAM
02.[Bug] Modify for Compiler Warning Message
v.0.86.02: ycchen@022108
01.[Bug] Fix set to 1280x1024 mode in VGA1(viewsonic G70B) + VGA2(viewsonic VA-703)
v.0.86.01: ycchen@021808
01.[Bug] Fixed VGA2 can't parse EDID properly
v.0.86.00: ycchen@012808
01.[New] Support VGA2 Clone Display
----------------------------------------------------------------------
v.0.85.1: ycchen@120307
01.[Bug] Modify for 1920x1200 display timing incorrect
02.[New] remove 1920x1200 for AST1100
v.0.85.0: ycchen@110107
01.[New] Support AIP100 FPGA, ycchen@082107
02.[New] Modify 1920x1200x60Hz to Reduce Blank Mode, ycchen@110107
----------------------------------------------------------------------
v.0.84.7: ycchen@082307
01.[Bug] Fixed RHEL 5.0 1600x1200x32bpp display abnormal issue
v.0.84.6: ycchen@081707
01.[Bug] Fixed RHEL 4.5 screen saver - Apollonian failed issue
v.0.84.5: ycchen@073007
01. [New] Support AST2100
02. [New] Support Solaris 10 x86 U4
03. [Bug] Fixed screen pitch incorrect in some specific monitor
----------------------------------------------------------------------
v.0.83.5: ycchen@052507
01. [Bug] Fixed KDE screen saver - lines cause system hanged
V.0.83.4: ycchen@051107
01. Bump Version Only
----------------------------------------------------------------------
V.0.82.2: ycchen@090106
01. Fixed Some Screen Saver Cause System Hanged
V.0.82.0: ycchen@072106
01. Bump Version Only
----------------------------------------------------------------------
V.0.81.3: ycchen@070306
01. [Bug] Fixed QCI #16464: HCT 2.4.1/video test hanged in JDS
02. [Bug] Fixed QCI #15314: can't swith to 1024x768x85Hz
V.0.81.1: ycchen@051206
01. [Bug] Fixed save/restore incorrect
----------------------------------------------------------------------
V.0.80.0: ycchen@031506
01. [Bug] Fixed Display abnormal in MMIO Mode
02. [Bug] Fixed the error message while update driver
----------------------------------------------------------------------
V.0.62.0: ycchen@011506
01. [Bug] Fixed Get DRAM size incorrect
----------------------------------------------------------------------
v.0.61.0: ycchen@011106
001. First Release for Solaris x86
